Zoom V6-SP Multi-Effects Vocal Processor Pedal The Zoom V6-SP Multi-Effects Vocal Processor Pedal is designed specifically for bringing studio-quality sound to vocalists performing live. Packed with professional vocal effects and preloaded patches, harmony generator, built-in looper, formant-shift pedal, high-quality preamp, and USB audio interface, it can be used right out of the box to easily change the character of your vocals, on the fly. The V6-SP is divided into three distinct processing sections. Select your options within the Voice, Harmony, and Effect section, and save them as a patch. Each section can be quickly activated or deactivated within that patch anytime using the corresponding footswitch. The Voice section features 12 voice effects including pitch correction. The Harmony section adds up to two backing vocals for up to three-part harmonies, and the Effect section offers 10 popular classic and modern studio effects. The unit operates up to 3.5 hours on four AA batteries and comes with an AC adaptor. Features Simultaneously use up to three vocal processors from the Voice, Harmony, and Effect sections 10 studio-grade effects Built-in compressor for optimizing input signal levels Built-in Enhancer for optimizing input signal frequencies via equalization and de-essing Formant pedal for adjusting your vocal character in real time Looper for recording up to 3.5 minutes of sound 40 preset patches created by professional vocalists and audio engineers 100 memory locations for storing user-created patches USB 2.0 audio interface capable of recording up to 16-, 24-, or 32-bit at 44.1 kHz USB port for firmware updates, power, and audio recording XLR line output for connecting to external mixing consoles Headphone output with dedicated volume control Runs for 3.5 hours on four AA batteries Included AC adapter Optional expression pedal offers advanced control over effects parameters Specifications Processors Voice Section: 12 Types Effect Section: 10 Types Harmony Section: 5 Types Effect Patches Preset Patches: 40 User-Created Patches: 100 Sampling Frequency 44.1 kHz A/D Conversion 24-Bit, 128x Oversampling D/A Conversion 24-Bit, 128x Oversampling Signal Processing 32-Bit Frequency Response 20 Hz to 20 kHz ( 1 dB / −3 dB) (200 Kilohms Load) Display 2-Digit, 7-Segment Mic Input XLR 3-Pin Female, Balanced Phantom Power: 48 VDC Gain: 3 to 40 dB Maximum Input Level: 4 dB Input Impedance: 3 Kilohms or Higher (1 kHz) Control Pedal Input 1/4″ / 6.3 mm Female (for FP02M Expression Pedal) Output Connector: XLR 3-Pin Male, Balanced Impedance: 50 Ohms or Greater (1 kHz) Ground Lift: Switchable Headphone Output 1/8″ / 6.3 mm TRS Female Maximum Output Level: 20 mW 20 mW (into 32 Ohms Load) Equivalent Input Noise -125 dBu or Less ( A-Weighted, 150 Ohms Input, 40 dBu Input Gain, Phantom Power Off) Noise Floor -75 dBu USB Port 2-In / 2-Out Micro-USB 2.0 Full Speed 44.1 kHz / 16-, 24-, 32-Bit Power Zoom AD-16 AC Adapter, 9 VDC, 500 mA 4 x AA Battery, 3.5 Hours Continuous Operation (with Alkalines) Power Can Also Be Supplied via USB Port External Dimensions (D x W x H) 7.1 x 12.6 x 3″ / 18.1 × 32 × 7.7 cm Weight 3.4 lb / 1.56 kg (Excluding Batteries)
